Conference Rooms

List of Rooms

Table

Building	Room	Style	Instructions
Gilbert Place	1110	Standard Config	KnowledgeWorks II 1110
	1125	Display Only	KnowledgeWorks II 1125
	2225	Standard Config	KnowledgeWorks II 2215a
	1125	Display Only	KnowledgeWorks II 1125
	1125	Display Only	KnowledgeWorks II 1125
	1125	Display Only	KnowledgeWorks II 1125
McBryde	133c	Standard Config	McBryde 133c
	655	Display Only	McBryde 655
Torgersen	1100	Zoom Room	Torgersen 1100
	1100c	Zoom Room	Torgersen 1100c
	1210	Zoom Room	Torgersen 1210
	3160A	Standard Config	Torgersen 3160a

Details

Standard Configuration:

• A Room Pc which connects to the various features in the room and can host a meeting.
• Optional Laptop hookups for a presentation style event

Display Only configuration:

• Only a TV or projector in the room
• Best used with the Meeting Owl and a laptop

Zoom Room Configuration:

• Room PC / Server which controls the room
• local hook ups are not always featured
• Intended to run everything through Zoom

Instructions by Room

KnowledgeWorks II 1110

Features

• Projector
• Ceiling Microphones
• 2x Vaddio Robshot Cameras
• Room PC
• Crestron Wall Panel

Connecting

Option 1: Room PC

1. On the Crestron turn the System On
2. Select Room PC
3. Current Configuration for this option requires a password to log in, contact techstaff

Option 2: User Laptop

1. On the Crestron turn the system On
2. Select <Local Computer Option>
3. Connect the HDMI / VGA cable to your Laptop

Post Meeting

1. On the Crestron click System Off
2. The screen should roll up and the projector should turn off

McBryde 133c

Features

• Projector
• Polycom table Mic
• Vadio Roboshot Camera
• Switcher Panel

Torgersen 1100

Features

• 2x TV’s
• 1x 3x3 Video Wall
• Desktop Computer
• Podium Mounted Crestron
• 4x Vaddio Robo Cam
• 10x Desktop Mics 4x Lapel Mics (Located in Server Closet)

Torgersen 1100c

Features

• 4x TV’s
• Desktop Computer
• iPad Zoom Room Controller / Speaker
• Panacast Wide angle Camera & Vaddio Robo Cam

Torgersen 1210

Features

• 2x TV’s
• Desktop Computer
• Crestron Mercury Zoom Room Controller / Speaker
• Panacast Wide angle Camera

Connecting

This Room is configured as a Zoom Room.

Troubleshooting

The most common problem with this room currently is the Crestron Mercury Zoom Controller loses sync with the Room Computer and needs Re-Paired.

Option 1: Contact Techstaff before the meeting and we can get the pairing code entered

1. Call Techstaff (540)231-3167
2. Click "sign in" on the Crestron, this should bring you to a page with a pairing code.
3. Tell us the code, we'll enter it in and remotely pair it to the room.
4. On the Crestron there will be a pop up asking if it was you, click Yes it was Me.

Option 2: Secondary zoom controller

Download the zoom room controller app on your phone and connect through the sharing code displayed on the tv's then they can control the room from their phone similar to using the Crestron. This offers flexibility in seating since the Crestron is mounted in the center of the table. Zoom also has a support page mentioning using a web console from a laptop as well, but we have yet to test this.

• [iPhone (Tested)]
• [Android (Tested) ]
• [Web (Untested)]

Torgersen 3160a

Features

• Projector
• TV (Currently Not recommended for Use)
• Desktop Computer
• Wireless Mouse and Keyboard
• Yamaha Zoom Bar (Wide angle Camera, Room Microphone and Room Speakers)

Connecting

Scenario 1: Laptop to Projector (nothing else)

1. Identify the HDMI Jack on the left wall as you enter the room
2. Ensure the HDMI cable coming from the Table is plugged into the jack and not damaged
3. Turn on projector with Remote Control (This should be on the table)
4. Plug in laptop to the HDMI cable on table
5. Configure "2nd Screen" on Laptop (Extend or Mirror most commonly)
6. At this point you should have your laptop displaying on the projected screen. If not the HDMI cable may be faulty.

Scenario 2: Zoom Bar with Room PC and Projector

Note: The zoom bar is not currently intended for use without the Room Computer.

1. Identify the HDMI Jack on the left wall as you enter the room
2. Ensure that the HDMI cable running from the media cabinet along the wall is plugged in and not damaged
3. Turn on the Projector with the remote control (This should be on the table)
4. Open the media cabinet and make sure the desktop is powered on.
5. Also in the media cabinet should be a wireless mouse and keyboard combo which will be used to control the room PC.
6. The PC should be displaying on the projector now. If not use the mouse and keyboard to wake the pc.
7. The machine should have a conference account which anyone can use to open windows and navigate to zoom 8. Open zoom and Join your meeting. Select the Yamaha zoom bar for all three options (mic, camera, speaker)

Post Meeting

When you finish your meeting we ask that you:

1. Leave the Desktop in the cabinet ON
2. Turn off the wireless mouse & keyboard
3. If it isn’t plugged in, Plug in the Room Computer HDMI
4. Ensure that the Projector is turned OFF

Troubleshooting

The most common problems in this room are related to the wrong input being plugged into the wall jack, and the room Computer/keyboard/mouse being off.