Conference Rooms

List of Rooms

<Insert Table of rooms Here>

Instructions by Room

Torgersen 1210

Features

• 2x TV’s
• Desktop Computer
• Crestron Mercury Zoom Room Controller / Speaker
• Panacast Wide angle Camera

Torgersen 3160A

Features

• Projector
• TV (Currently Not recommended for Use)
• Desktop Computer
• Wireless Mouse and Keyboard
• Yamaha Zoom Bar (Wide angle Camera, Room Microphone and Room Speakers)

Connecting

Scenario 1: Laptop to Projector (nothing else)

1. Identify the HDMI Jack on the left wall as you enter the room
2. Ensure the HDMI cable coming from the Table is plugged into the jack and not damaged
3. Turn on projector with Remote Control (This should be on the table)
4. Plug in laptop to the HDMI cable on table
5. Configure "2nd Screen" on Laptop (Extend or Mirror most commonly)
6. At this point you should have your laptop displaying on the projected screen. If not the HDMI cable may be faulty.

Scenario 2: Zoom Bar with Room PC and Projector

Note: The zoom bar is not currently intended for use without the Room Computer.

1. Identify the HDMI Jack on the left wall as you enter the room
2. Ensure that the HDMI cable running from the media cabinet along the wall is plugged in and not damaged
3. Turn on the Projector with the remote control (This should be on the table)
4. Open the media cabinet and make sure the desktop is powered on.
5. Also in the media cabinet should be a wireless mouse and keyboard combo which will be used to control the room PC.
6. The PC should be displaying on the projector now. If not use the mouse and keyboard to wake the pc.
7. The machine should have a conference account which anyone can use to open windows and navigate to zoom 8. Open zoom and Join your meeting. Select the Yamaha zoom bar for all three options (mic, camera, speaker)

Troubleshooting

The most common problems in this room are related to the wrong input being plugged into the wall jack, and the room Computer/keyboard/mouse being off.